EFS Consulting
Looking for US-specific information? Visit our US site for content tailored to the US market.
11/17/2026

Public Procurement Law & Procedures: What Contracting Authorities and Bidders Need to Know

Every year, public contracting authorities award billions in contracts for works, supplies and services. To ensure transparency, cost-effectiveness and fairness, these procurements are governed by clear public procurement rules. These rules define the permitted procedures, suitability requirements, award criteria and conditions for awarding contracts. This insights provides an overview of public procurement procedures in Austria, the applicable legal requirements and key considerations for contracting authorities and bidders.

Table of contents

Key Takeaways

  • Austrian public procurement law governs the procurement of supplies, works and services by public contracting authorities and utilities contracting entities. The central legal basis is the Federal Public Procurement Act 2018, as amended. Supplementary special legislation applies to concessions and procurement in the defence and security sectors.
  • Core principles include equal treatment, non-discrimination, proportionality, transparency, free and fair competition, and value for money. Environmental compatibility and sustainability must also be taken into account.
  • The choice of procurement procedure depends in particular on the type of contracting authority, the type of contract, the estimated contract value and the statutory conditions governing the relevant procedure.
  • New EU thresholds have applied since 1 January 2026. They determine, in particular, whether a procurement falls below or above the EU thresholds and which publication and procedural obligations apply.
  • Significant changes introduced by the Public Procurement Law Act 2026 have applied since 1 March 2026. These include new or permanently established national value limits and additional requirements for direct awards.
  • For bidders, the tender conditions, deadlines, suitability requirements and award criteria are decisive. Formal errors or missing evidence may result in a tender being excluded.

 

What is Public Procurement Law?

Public procurement law comprises the rules governing how public contracting authorities procure works, supplies and services from the market. These include supply contracts, works contracts and service contracts. Its purpose is to ensure that public procurement is conducted in accordance with clear rules, transparent procedures and objective criteria rather than on an arbitrary basis. Public procurement law therefore forms the basis for public tenders in Austria.

Public Procurement Law in Austria

In Austria, public procurement law regulates how, in particular, the federal government, the provinces, municipalities, public bodies and utilities contracting entities must procure works, supplies and services. Utilities contracting entities include organisations carrying out certain activities, particularly in areas such as water, energy or transport supply. They are partly subject to separate procurement provisions and value limits.

Legally independent entities may also be public contracting authorities if they were established to perform non-commercial tasks in the public interest and the legally required state financing, supervision or control relationship exists. Whether a particular organisation is subject to procurement law must be assessed case by case against the statutory requirements.

The central legal basis is the Federal Public Procurement Act 2018 in the Federal Legal Information System, abbreviated as BVergG 2018, as amended.

The BVergG 2018 specifies, among other things:

  1. which procurement procedures are available,
  2. under which conditions they may be selected,
  3. which requirements apply to contracting authorities, candidates and bidders,
  4. how suitability and tenders are assessed,
  5. how award decisions must be prepared and documented,
  6. which legal remedies are available.

Since 1 March 2026, significant changes introduced by the Public Procurement Law Act 2026, Federal Law Gazette I No. 8/2026, must be taken into account.

Depending on the procurement project, other legal bases may be relevant in addition to the BVergG 2018. These include, in particular, the Federal Public Procurement Concessions Act 2018, the Federal Public Procurement Act for Defence and Security 2012, the Clean Vehicles Procurement Act and directly applicable European Union legislation.

Public Procurement Law vs. Procurement Management

While public procurement law defines the legal framework, procurement management covers the practical planning, preparation, implementation and management of tenders. Successful procurement therefore requires not only legal compliance, but also:

  • professional project management,
  • sound market and industry knowledge,
  • clearly defined requirements,
  • suitable evaluation models,
  • structured stakeholder management,
  • clear and auditable documentation,
  • professional risk and contract management.

Public procurement law and procurement management should therefore not be considered in isolation. Only their interaction enables procurement decisions that are both legally compliant and economically successful.

Purpose: Why does Public Procurement Law exist?

The purpose of public procurement law is to make public procurement fair, transparent and economical. Public contracting authorities administer public funds and have considerable purchasing power in many markets. Rules are therefore needed to:

  • enable free and fair competition,
  • ensure equal treatment,
  • prevent discrimination,
  • make decisions reviewable,
  • support the economical use of funds.

Contracts should be awarded to authorised, reliable and capable companies at commercially appropriate prices. This does not necessarily mean that only the lowest purchase price matters.

Depending on the statutory requirements and the provisions of the tender, the contract may be awarded on the basis of the lowest price, the lowest cost or the best price-quality ratio. Quality, sustainability or life-cycle cost criteria must be described transparently, be objectively assessable and be linked to the subject matter of the contract.

Environmental compatibility and sustainability must also be taken into account when conducting procurement procedures. Social and innovative aspects may also be considered within the legally permissible framework.

Legal Remedies and Useful Sources of Information

Procurement decisions must be justified in a clear and transparent manner and documented in a legally compliant way.

Companies that consider their rights to have been infringed by a separately contestable decision may seek legal protection under public procurement law, subject to the statutory requirements.

Before the contract is awarded, applications for review and applications for interim measures are particularly relevant. After the award or revocation, declaratory proceedings may be initiated under certain conditions.

The competent procurement review authority depends on whether the contracting authority falls within the federal or provincial sphere of administration. The Federal Administrative Court is generally responsible for federal procurements. For procurements within the provincial sphere, the respective provincial administrative courts are responsible under the applicable provincial procurement review laws.

Reliable starting points for current information include:

 

Who is Affected by Public Procurement Law?

Public procurement law applies, on the one hand, to public contracting authorities and utilities contracting entities procuring works, supplies and services. On the other hand, it affects companies participating in public tenders as candidates or bidders.

For contracting authorities, this means in particular:

  • properly estimating the contract value,
  • selecting a permissible procurement procedure,
  • defining requirements clearly and without discrimination,
  • correctly distinguishing suitability, selection and award criteria,
  • meeting deadlines,
  • documenting decisions comprehensibly.

For candidates and bidders, this means:

  • reviewing notices and tender documents in full,
  • strictly observing deadlines,
  • meeting suitability requirements in good time,
  • correctly submitting the required evidence or self-declarations,
  • complying with minimum requirements,
  • submitting a tender that complies with the tender documents.

 

5 Key Principles of Public Procurement Law

The BVergG 2018 is based on key principles of EU and national law. They must be observed when preparing and conducting procurement procedures and making procurement decisions.

The following five points summarise key guiding principles. The list is not exhaustive. The BVergG contains additional requirements, particularly regarding contractors’ suitability, commercially appropriate prices, and environmental, social and innovative aspects.

1. Competition

Public contracts must be awarded in compliance with free and fair competition.

Suitable companies should have the opportunity to compete for public contracts. Contracting authorities, in turn, should be able to compare different tenders and make a cost-effective procurement decision.

An unjustified restriction of the potential group of participants is not permitted.

2. Transparency

Requirements, deadlines, procedural rules and award criteria must be clear, comprehensible and generally announced in advance. Complete documentation is essential so that decisions can subsequently be reviewed and justified. Transparency also means that the rules laid down in the tender must be observed throughout the procedure.

3. Equal treatment and non-discrimination

All candidates and bidders must be treated according to the same public procurement rules.

No company may be favoured or disadvantaged without objective justification. This concerns, among other things:

  • access to information,
  • answers to bidder questions,
  • assessment of evidence,
  • examination and evaluation of tenders,
  • the handling of clarifications and corrections.

4. Proportionality

Requirements and evidence must be proportionate to the subject matter of the contract and the procurement risk.

A smaller procurement project should not be burdened with disproportionately high financial, technical or administrative requirements. Suitability requirements may be defined only to the extent objectively justified by the relevant contract.

5. Economic efficiency

Procurement procedures must be conducted in accordance with the principle of value for money.

Economic efficiency does not necessarily mean that only the lowest price is decisive. Depending on the procedure, quality, costs, life-cycle costs and environmental or social aspects may also be considered.

The award criteria must:

  • are objective and transparent,
  • are linked to the subject matter of the contract,
  • allow effective verification,
  • are announced and weighted in advance.

The statutory principles comprise equal treatment, non-discrimination, proportionality, transparency, free and fair competition, and value for money.

 

What Types of Procurement Procedures Are Available?

Depending on the contracting authority, contract value, subject matter and complexity, different types of procedure may be considered. The choice of procedure affects the level of effort, duration, competitive environment and flexibility of the procurement process.

The BVergG 2018 identifies, in particular:

  • the open procedure,
  • the restricted procedure with prior publication,
  • the restricted procedure without prior publication,
  • the negotiated procedure with prior publication,
  • the negotiated procedure without prior publication,
  • the framework agreement,
  • the dynamic purchasing system,
  • the competitive dialogue,
  • the innovation partnership,
  • the direct award,
  • the direct award with prior publication.

The individual types of procedure cannot be selected at will. The contracting authority must verify that the statutory conditions for the desired procedure are met.

Open procedure

In an open procedure, an unlimited number of companies are publicly invited to submit tenders.

There is no preceding selection phase. All interested companies may submit a tender within the tender deadline, provided they meet the tender conditions.

The open procedure is particularly suitable where the subject matter of the contract can be described with sufficient clarity and no negotiations on the contract content are envisaged.

Restricted procedure

The restricted procedure with prior publication is conducted in two stages.

In the first stage, an unlimited number of companies are publicly invited to submit requests to participate. The contracting authority assesses suitability and selects suitable candidates based on the published selection criteria.

In the second stage, the selected candidates are invited to submit tenders.

Restricted procedure without prior publication

In a restricted procedure without prior publication, the contracting authority directly invites a limited number of suitable companies to submit tenders.

This type of procedure may be selected only under the conditions provided by law. Since 1 March 2026, its use by classical public contracting authorities has been further restricted. It is particularly relevant for works contracts below the statutory value limits. Different rules may apply to utilities contracting entities.

Negotiated procedure

In a negotiated procedure, contracting authorities may negotiate the contract content with selected bidders.

A distinction must be made between the negotiated procedure with prior publication and the negotiated procedure without prior publication. These procedures may be selected only under their respective statutory conditions.

A negotiated procedure may be relevant, for example, for certain complex services, where adaptation or design work is required, or in exceptional situations governed by law. Not all elements may be negotiated without restriction. Minimum requirements and award criteria must be observed in particular.

Direct award

In a direct award, the contract may generally be awarded directly to a suitable company.

In the classical sector, a direct award is permissible where the estimated contract value is below:

  • EUR 500,000 for works contracts, and
  • EUR 143,000 for supply and service contracts,

in each case excluding VAT.

If the estimated contract value exceeds EUR 50,000, the public contracting authority must generally endeavour to obtain at least three tenders or non-binding price quotations, unless objective reasons prevent this. This approach must be documented.

Minimum procurement requirements also apply to direct awards. A direct award is therefore not a procurement entirely free of rules or documentation.

Subject to the statutory requirements, the following must be documented in particular:

  • the subject matter of the contract,
  • the estimated or awarded contract value,
  • the appointed contractor,
  • tenders or price quotations obtained,
  • where applicable, the assessment of price appropriateness.

Partly different value limits and rules apply to utilities contracting entities and special services.

Direct award with prior publication

For a direct award with prior publication, the intended award is first publicly announced. Interested companies may express their interest or submit a tender.

The subsequent selection may be more flexible than in more formalised procurement procedures. Nevertheless, the principles of public procurement law, especially equal treatment, transparency and competition, must be observed.

Framework agreement

A framework agreement establishes the terms governing contracts to be awarded during a specified period. It may be concluded with one or more companies.

A framework agreement does not generally create a purchase obligation. Individual services are subsequently called off on the basis of the framework agreement, with or without a renewed call for competition.

Framework agreements are particularly suitable for recurring procurement needs where quantities or call-off dates cannot yet be fully determined in advance.

Dynamic purchasing system

A dynamic purchasing system is a fully electronic procedure for procuring goods or services whose generally available market characteristics meet the public contracting authority’s requirements.

Further suitable companies may be admitted to the system throughout its term. The dynamic purchasing system is therefore particularly suitable for recurring, standardisable procurement in markets with several potential providers.

Competitive dialogue

Competitive dialogue may be considered for complex procurement projects where the contracting authority knows its needs and objectives but cannot fully specify the most suitable technical, legal or economic solution.

Suitable solutions are developed in dialogue with selected participants. Once the dialogue phase has been concluded, the companies are invited to submit final tenders.

Innovation partnership

The innovation partnership enables the development and subsequent procurement of an innovative product or service where no suitable solution is yet available on the market.

It combines research and development phases with possible subsequent procurement. The statutory conditions, performance phases, interim targets and exit options must be clearly defined in the procedure.

 

The Procurement Process

A procurement procedure follows structured process steps. Its specific design depends on the type of procedure, estimated contract value, subject matter and category of contracting authority.

1. Needs assessment and procurement strategy

  • The process begins by asking what actually needs to be procured. Technical, functional, economic, organisational and legal requirements are clarified. Even at this stage, the following should be examined: What need exists?
  • What objectives does the procurement pursue?
  • Which mandatory and optional requirements apply?
  • Which internal and external stakeholders need to be involved?
  • How is the relevant market structured?
  • What contract term, options and extensions are envisaged?
  • What is the expertly estimated total contract value?
  • Which type of procedure is permissible and suitable?
  • Is prior publication required?
  • What risks exist?
  • Which award logic supports the procurement objectives?

Careful preparation is crucial. Unclear requirements can often be corrected only to a limited extent, or not at all, during an ongoing procedure.

2. Market consultation and contract value calculation

A market consultation may be conducted before the procurement procedure is initiated. It helps the contracting authority better assess market structures, available solutions, technical developments and realistic costs.

However, a market consultation must not give individual companies an unjustified competitive advantage.

The estimated contract value must be determined by a competent estimate. The estimated total value excluding VAT is generally decisive. Options, contract extensions, premiums and related lots must be considered in accordance with the statutory requirements.

A contract must not be divided for the purpose of circumventing procurement rules or thresholds.

3. Preparation of the tender documents

The next step is to prepare the tender documents.

Depending on the procedure, these include in particular:

  • specification of requirements,
  • technical specifications,
  • suitability criteria,
  • evidence of suitability,
  • selection criteria,
  • minimum requirements,
  • award criteria and weightings,
  • pricing schedules,
  • contract terms,
  • deadlines and dates,
  • procedural and communication rules,
  • requirements for subcontractors and bidding consortia.

The requirements must be formulated clearly, completely, proportionately and without discrimination.

4. Publication and provision of documents

In procedures with prior publication, the tender is published.

Above the EU thresholds, EU-wide publication through Tenders Electronic Daily is generally required. Depending on the procedure and threshold range, additional national publication requirements must be observed.

The tender documents are generally made available to interested companies electronically.

5. Participation or tender phase

Depending on the procedure, companies first submit a request to participate or directly submit a tender.

Questions, clarifications and other communication must be structured, documented and non-discriminatory. Information relevant to tender preparation must generally be made available to all affected companies in the same way.

Bidders should pay particular attention to:

  • reading all documents in full,
  • raising ambiguities in good time,
  • complying with deadlines and formal requirements,
  • having the required evidence available,
  • preparing a complete and compliant tender.

6. Examination of exclusion grounds and suitability

The contracting authority examines whether exclusion grounds exist and whether the candidate or bidder is suitable.

Suitability includes in particular:

  • professional eligibility,
  • professional reliability,
  • financial and economic standing,
  • technical and professional ability.

The relevant point in time for suitability depends on the type of procedure. In an open procedure, the time of opening the tenders is generally relevant. In two-stage procedures, the expiry of the deadline for requests to participate is usually decisive.

Suitability may initially be demonstrated by a self-declaration or the European Single Procurement Document. The specific evidence must be submitted in accordance with the statutory requirements and the tender provisions.

7. Examination of tenders

The examination of tenders must be distinguished from the suitability assessment of the company.

Depending on the procedure, the following are examined in particular:

  • formal completeness,
  • timely submission,
  • compliance with the tender documents,
  • arithmetical accuracy,
  • compliance with minimum requirements,
  • plausibility and appropriateness of prices,
  • other grounds for exclusion.

Ambiguities may be clarified within the legally permissible framework. However, clarification must not result in an impermissible subsequent amendment or improvement of the tender.

8. Negotiation or final tender evaluation

If the selected procedure allows negotiations, they may be conducted in accordance with the established procedural rules.

Particular attention must be paid to:

  • equal treatment of all remaining bidders,
  • confidentiality,
  • clear and auditable documentation,
  • compliance with minimum requirements,
  • no subsequent alteration of the award criteria.

After the examination of tenders or negotiations has been completed, the remaining tenders are evaluated against the published award criteria.

An electronic auction may be used as an instrument in certain circumstances. However, it is not an independent procurement procedure.

9. Award decision and standstill period

After the evaluation is complete, the contracting authority makes the award decision.

The remaining bidders must be informed of the decision in accordance with the statutory requirements. As a rule, the notification must contain the information required to understand the decision and, where appropriate, seek legal review.

The contract may generally be awarded only after the standstill period has expired. The standstill period is ten days for electronic transmission or provision, and 15 days for transmission by post or another suitable method. Exceptions apply to certain procurements, such as call-offs under a framework agreement or dynamic purchasing system.

10. Award, contract conclusion and documentation

Once the standstill period has expired, the contract may be awarded provided there is no legal impediment.

The procurement process must be documented in a clear and traceable manner. This includes, in particular, key decisions, examination steps, evaluations, communications and reasons.

Robust documentation strengthens legal certainty and facilitates internal approvals, audits, project handovers and subsequent contract management.

 

Thresholds in public procurement law

Thresholds determine whether a procurement procedure falls below or above the EU thresholds.

EU thresholds are generally adjusted every two years. New thresholds for 2026 and 2027 have applied since 1 January 2026.

Contract values are generally calculated excluding VAT.

Why Are Thresholds Important?

Classification below or above the EU thresholds affects in particular:

  • the permissible types of procedure,
  • publication obligations,
  • EU-wide publication obligations,
  • statutory minimum deadlines,
  • electronic communication requirements,
  • documentation obligations.

Above the EU thresholds, EU-wide publication via https://ted.europa.eu/ is generally required.

Below the EU thresholds, simplified procedures are available depending on the contracting authority, type of contract and contract value. These include, in particular, the direct award, the direct award with prior publication and, in certain circumstances, the restricted procedure without prior publication.

Current thresholds

Restricted procedure without prior publication: For works contracts up to EUR 1,000,000; for supply and service contracts up to EUR 143,000

Negotiated procedure without prior publication: For works, supply and service contracts up to EUR 143,000

Thresholds in the classical sector

Type of procedure Thresholds (excluding VAT)
Direct award EUR 143,000
Direct award for special services EUR 100,000
Direct award with prior publication for supply and service contracts EUR 143,000
Direct award with prior publication for works contracts EUR 500,000
Direct award with prior publication for special services EUR 150,000
Type of contract
Supply contracts EUR 216,000
Supply contracts awarded by central public contracting authorities EUR 140,000
Service contracts EUR 216,000
Service contracts awarded by central public contracting authorities EUR 140,000
Works contracts EUR 5,404,000

 

Thresholds in the utilities sector

Type of procedure Thresholds (excluding VAT)
Direct award EUR 143,000
Direct award for special services EUR 150,000
Direct award with prior publication for supply and service contracts EUR 200,000
Direct award with prior publication for works contracts EUR 500,000
Direct award with prior publication for special services EUR 200,000
Type of contract
Supply contracts EUR 432,000
Service contracts EUR 432,000
Works contracts EUR 5,404,000

Source: Schwellenwerte-eVergabe-26.pdf

 

Division into lots and prohibition of artificial splitting

When awarding contracts in lots, the estimated total value of all related lots must generally be taken into account.

A procurement project must not be divided with the aim of circumventing the application of the BVergG or EU procurement rules. At the same time, procurement law contains special rules for lots and small lots. Classification must therefore be based on the specific procurement project and the statutory calculation provisions.

 

E-procurement and digital support for procurement management

E-procurement means the electronic processing of procurement procedures.

It includes in particular:

  • electronic publication,
  • digital provision of tender documents,
  • electronic communication,
  • digital submission of requests to participate and tenders,
  • structured examination and documentation,
  • electronic auditability of the procurement process.

Electronic communication is now standard practice in modern procurement procedures and is strongly mandated by law, particularly above the EU thresholds.

Digital processes can reduce media discontinuities, increase transparency and facilitate collaboration between the procurement office, specialist departments, purchasing, IT, legal and management teams.

In connection with the digitalisation of procurement processes, concepts such as eNIN (electronic non-interaction records) and modern digital procurement landscapes are also becoming increasingly important.

At the same time, expectations of procurement teams and companies are increasing. Tender documents are becoming more extensive, coordination needs more complex and documentation requirements more demanding. Digital tools can help structure information, monitor deadlines and document processing steps transparently.

However, digital applications do not replace technical or procurement-law decisions. Responsibility for the tender, examination of tenders, evaluation and award decision remains with the competent persons and bodies.

Tenderee©: Structured Tender Preparation and Management

Tenderee® supports organisations in the structured planning and preparation of tenders.

Its key focus areas include:

  • needs capture,
  • schedule and milestone planning,
  • structured document creation,
  • standardised templates,
  • guided questionnaires,
  • central collaboration among the stakeholders involved.

This enables tender projects to be prepared more consistently and managed with greater transparency.

Legal and technical review of the generated content, as well as the decision on the specific design of the tender, remain the responsibility of the project and procurement teams.

Tendalyzer: AI-Powered Tender Analysis and Evaluation

Tendalyzer supports contracting authorities and contractors in analysing, reviewing and evaluating tender and bid documents.

For contracting authorities, the AI platform analyses tender documents for ambiguities, inconsistencies and risks and supports structured tender evaluation. For contractors, Tendalyzer automatically extracts requirements, award criteria, deadlines and evidence, and checks tenders for completeness and formal risks before submission.

Learn more about AI-powered tender analysis with Tendalyzer.

Tendalyzer Monitor: Automatically Identifying Relevant Tenders

Tendalyzer Monitor automatically searches national, European and international tender platforms using individual search profiles. Companies receive clearly structured relevant tenders, including deadlines, requirements, management summaries and initial participation assessments.

This significantly reduces research effort and enables teams to focus on tenders that genuinely align with their service portfolio.

Why Digital Procurement Tools Are Becoming Increasingly Important

Digital solutions do not replace technical or procurement-law decisions. However, they can help make procurement processes more efficient, transparent and consistent.

They are particularly relevant for:

  • complex tender documents,
  • short participation and tender deadlines,
  • extensive documentation obligations,
  • complex evaluation matrices,
  • multiple stakeholders,
  • recurring procurement processes,
  • extensive tender monitoring.

While Tenderee© supports the structured creation and management of tenders, Tendalyzer can be used for analysis, monitoring, evaluation and decision-making. Together, they create greater efficiency, quality and auditability in modern procurement management.

 

Suitability: Evidence Required from Bidders

Public contracts may generally be awarded only to suitable companies.

Suitability includes in particular:

  • professional eligibility,
  • professional reliability,
  • financial and economic standing,
  • technical and professional ability.

The timing, type and scope of evidence depend on the procedure and the provisions of the tender.

Typical evidence of suitability includes:

Suitability criteria Evidence (examples)
Professional authorisation Extract from the trade register, professional register, permits or comparable professional evidence
Professional reliability Criminal record certificates, tax and social security records, or other evidence required by law
Financial and economic capacity Annual financial statements, turnover declarations, credit reports, insurance certificates
Technical capacity References, information on specialist personnel, technical equipment, quality management or capacity evidence

 

The evidence actually required depends on the tender documents and the specific contract. Evidence may generally be required only to the extent objectively justified by the subject matter of the contract.

Self-declaration and European Single Procurement Document

Companies do not always have to submit every individual item of evidence with the request to participate or tender.

Depending on the procedure, suitability may initially be demonstrated in particular by:

  • a self-declaration, or
  • the European Single Procurement Document.

The specific evidence must subsequently be submitted in accordance with the BVergG and the tender documents.

Nevertheless, companies should ensure that the required conditions are already met at the legally relevant time. Subsequent submission of evidence does not automatically mean that a suitability condition created only later can be taken into account.

Suitability criteria and award criteria

Suitability and award criteria perform different functions.

Suitability criteria concern the company. They answer whether a company is fundamentally capable of and authorised to perform the contract.

Award criteria concern the tender. They are used to compare the remaining tenders and identify the successful tender.

The following categories may also be relevant:

  • grounds for exclusion,
  • selection criteria,
  • minimum requirements,
  • technical specifications,
  • contract and performance conditions.

The individual categories must not be mixed.

Bidding consortia and working groups

Bidding consortia and working groups can enable small and medium-sized enterprises in particular to participate jointly in larger procurement procedures.

Whether suitability requirements must be met jointly or by individual members depends on the nature of the criterion, the intended division of performance and the tender conditions.

Each member must generally possess the authorisation for the part of the services it is to perform. For a homogeneous subject matter, several or all members may need to possess the same authorisation.

Reliability is usually assessed separately for each member. Financial and technical capacities may be pooled within the consortium under the statutory conditions.

 

Deadlines in procurement procedures

Deadlines are among the most critical elements of a procurement procedure.

The applicable deadlines depend in particular on:

  • whether the procurement is below or above the EU thresholds,
  • the type of procedure,
  • the category of contracting authority,
  • the type of publication,
  • electronic availability of documents,
  • whether an accelerated procedure applies,
  • the complexity of the contract.

The following overview presents key statutory minimum deadlines for classical public contracting authorities above the EU thresholds. It does not replace an assessment of the specific procedure.

Deadline Typical period
Deadline for requests to participate generally at least 30 days
Tender deadline in an open procedure generally at least 30 days
Tender deadline in two-stage procedures depends on the category of contracting authority and the procedure; generally at least 25 days for central public contracting authorities
Tender validity period must be kept short; generally no more than 5 months
Standstill period 10 days for electronic transmission, 15 days for other forms of transmission
Review application deadline in the federal sphere generally 10 days electronically or 15 days for other forms of transmission
Application for a declaration in the federal sphere generally 6 months from actual or possible knowledge of the award or revocation

 

Deadline for requests to participate

For restricted procedures with prior publication, negotiated procedures with prior publication, competitive dialogue and dynamic purchasing systems, the deadline for requests to participate above the EU thresholds is generally at least 30 days.

Tender deadline

In an open procedure, the tender deadline is generally at least 30 days.

Differentiated provisions apply to restricted procedures with prior publication and negotiated procedures with prior publication.

For certain central public contracting authorities, the tender deadline is generally at least 25 days. Other public contracting authorities may, under certain conditions, agree the tender deadline with the selected candidates. If no agreement is reached, it is generally at least ten days.

There are also statutory rules on shortened and extended deadlines, for example in accelerated procedures or where documents are not made fully available electronically.

Tender validity period

The tender validity period begins when the tender deadline expires. It is the period within which the contract is intended to be awarded and during which the bidder generally remains bound by its tender.

The tender validity period must be kept short and generally may not exceed five months.

If compelling reasons exist and a longer period was specified in the tender documents, the tender validity period may be up to seven months. If no tender validity period is specified, it is generally one month.

Standstill period

The standstill period begins when the award decision is transmitted or made available.

It is:

  • ten days for electronic transmission or provision,
  • 15 days for transmission by post or another suitable method.

The contract must generally not be awarded before the standstill period has expired.

No standstill period applies, in particular, to certain call-offs under a framework agreement or dynamic purchasing system.

Review application deadline

In federal review proceedings, applications for review against separately contestable decisions must generally be submitted:

  • within ten days in the case of electronic transmission, electronic provision or publication,
  • within 15 days in the case of transmission by post or another suitable method.

For direct awards, the deadline is generally ten days from the time the applicant became aware, or could have become aware, of the separately contestable decision.

Special deadline rules apply to challenges against tender documents.

For procurements within the provincial sphere, the applicable provincial procurement review laws must be observed.

Application for a declaration

An application for a declaration in the federal sphere must generally be submitted within six months from the time the applicant became aware, or could have become aware, of the award or revocation.

An application for a declaration may be inadmissible if the alleged infringement could already have been asserted in review proceedings.

Curable and Non-Curable Tender Defects

For tender defects, a distinction must be made between curable and non-curable defects.

The key question is whether subsequent remediation would:

  • alter the content of the tender,
  • create a condition that did not exist at the relevant time,
  • materially improve the bidder’s competitive position.

If only evidence of a condition already existing at the relevant time is missing, the defect may generally be curable. If the required condition itself is missing, a non-curable defect may exist. Binding provisions in tender documents that have become final must also be considered.

Whether, for example, missing information about a subcontractor can be remedied depends on its function, the tender conditions and the specific effects of naming it subsequently. A general assessment is not possible.

 

Typical errors and challenges in procurement management

The challenge rarely lies in conducting a procurement procedure correctly from a formal perspective. The real complexity arises where functional requirements, technical dependencies, economic objectives and different stakeholders have to be brought together.
Benjamin Braun, Engagement Manager

In practice, projects repeatedly show that successful procurement goes far beyond preparing tender documents. Particularly for IT systems, platforms, outsourcing projects or complex service contracts, project success is determined not only by compliance with public procurement rules. The quality of preparation, clarity of requirements and auditability of the basis for decisions are equally important.

Unclear requirements at the outset

A tender often begins with a generally understandable need without sufficiently specifying objectives, scope of services or minimum requirements.

This later results in:

  • scope for interpretation,
  • numerous bidder questions,
  • tenders that are difficult to compare,
  • a need for changes during the procedure,
  • increased legal and economic risks.

Inadequate contract value calculation

Options, extensions, related lots or recurring services are sometimes not fully considered when calculating the contract value.

An incorrect estimate may result in the wrong threshold range or an impermissible procedure being selected.

Price ahead of overall value for money

Many procurement procedures focus heavily on the purchase price.

Operating expenditure, implementation costs, life-cycle costs, interfaces, migration risks, consequential costs and vendor dependencies are sometimes not adequately considered.

However, such aspects may influence tender evaluation only if they have been defined as permissible, transparent award criteria linked to the subject matter of the contract.

Mixing suitability and award criteria

A common error is to use company-specific characteristics of the bidder as award criteria even though they legally belong to the suitability assessment.

The experience of a specifically designated project team may, under certain conditions, be relevant to tender quality. General company size or financial stability, by contrast, typically concerns suitability and cannot automatically be reassessed as an award criterion.

Differing stakeholder interests

Specialist departments, IT, purchasing, management, legal and procurement teams often assess requirements and tenders from different perspectives.

Without clear roles, decision-making rules and governance, the following arise:

  • lengthy coordination loops,
  • inconsistent requirements,
  • unclear responsibilities,
  • delayed decisions,
  • documentation gaps.

Lack of comparability between tenders

Particularly for complex services, tenders are often structured differently or based on different assumptions.

A sound evaluation therefore requires:

  • clear pricing schedules,
  • standardised response structures,
  • comprehensible minimum requirements,
  • objective award criteria,
  • evaluation methods defined in advance.

Inadequate documentation

Comprehensible documentation is essential both for legal certainty and internal governance.

It creates transparency for decision-makers and facilitates subsequent audits, project handovers and contract management.

Uncritical use of digital or AI-supported tools

Digital tools can support the processing of extensive documents. However, their results must not be adopted without review.

Particular attention is required for:

  • incompletely identified requirements,
  • incorrectly assigned deadlines,
  • missing document references,
  • incorrect legal conclusions,
  • data protection and confidentiality,
  • auditability of automated results.

AI-supported systems should therefore be used as support tools. Technical, economic and legal responsibility remains with the competent persons.

 

Conclusion

Successful procurement does not begin only with the award decision.

It starts with a sound needs assessment, a proper estimate of the contract value, the right procurement strategy and clearly defined requirements. Transparent award models, comprehensible decisions and complete documentation are equally important.

Those who sensibly combine public procurement law, procurement management and digital support create a robust basis for:

  • legally compliant procedures,
  • fair competition,
  • comparable tenders,
  • better procurement decisions,
  • successful long-term contractual relationships.

EFS Consulting supports companies and public contracting authorities in the structured, transparent and efficient implementation of complex procurement projects. Its services range from needs assessment and procurement strategy to tender preparation, evaluation models and structured supplier and tender analysis.

Digital solutions such as Tenderee® and Tendalyzer can complement methodological and technical project work. However, they replace neither legal advice nor the contracting authority’s responsibility for conducting and deciding the procurement procedure.

Are you planning a tender, facing a complex procurement decision or seeking to further develop your procurement processes? Our experts would be pleased to discuss your requirements in an initial, no-obligation consultation.

FAQs

What Is Public Procurement Law?

Public procurement law governs the procurement of supplies, works and services by public contracting authorities and utilities contracting entities.

In Austria, the Federal Public Procurement Act 2018, as amended, is the central legal basis. Supplementary special legislation applies to concessions and procurement in the defence and security sectors.

What Are the Five Principles of Public Procurement?

Five key principles of public procurement law are:

  • competition,
  • transparency,
  • equal treatment and non-discrimination,
  • proportionality,
  • value for money.

This summary is not exhaustive. The BVergG also sets out further requirements, particularly regarding companies’ suitability, commercially appropriate prices, and environmental compatibility and sustainability.

What types of procedure exist under public procurement law?

The most important types of procedure include:

  • open procedure,
  • restricted procedure,
  • negotiated procedure,
  • framework agreement,
  • dynamic purchasing system,
  • competitive dialogue,
  • innovation partnership,
  • direct award,
  • direct award with prior publication.

For restricted and negotiated procedures, a further distinction is made between procedures with and without prior publication.

Which Thresholds Have Applied Since 1 January 2026?

Since 1 January 2026, the following thresholds in particular have applied in Austria:

  • EUR 5,404,000 for works contracts,
  • EUR 140,000 for supply and service contracts awarded by central public contracting authorities,
  • EUR 216,000 for supply and service contracts awarded by other classical public contracting authorities,
  • EUR 432,000 for supply and service contracts awarded by utilities contracting entities.

The figures exclude VAT. Separate thresholds must be observed for special services and certain contract constellations.

What Is the Difference Between Suitability and Award Criteria?

Suitability criteria concern the company. They assess, in particular, authorisation, reliability, and economic and financial standing, as well as technical and professional ability. Award criteria concern the tender. They are used to compare and rank tenders. The two categories must be clearly separated.

Must All Evidence of Suitability Be Submitted with the Tender?

Not in every case. Depending on the procedure, suitability may initially be demonstrated by a self-declaration or the European Single Procurement Document. The specific evidence must be submitted in accordance with the statutory requirements and the tender documents. However, the required suitability must generally exist at the legally relevant time.

Which Deadlines Apply to Procurement Procedures?

The deadlines depend in particular on the threshold range, the type of procedure and the category of contracting authority.

Above the EU thresholds, the following basic rules apply, among others:

  • deadline for requests to participate generally at least 30 days,
  • tender deadline in an open procedure generally at least 30 days,
  • standstill period of ten days for electronic transmission or 15 days for other forms of transmission,
  • tender validity period generally no more than five months.

Special, shortened and extended deadline rules apply to individual procedures.

Does Every Formal Error in a Tender Constitute Grounds for Exclusion?

No. A distinction must be made between curable and non-curable defects. The key question is whether subsequent remediation would alter the tender’s content or improve the bidder’s competitive position. The assessment depends on the tender documents and the circumstances of the individual case.

When Should a Company Seek External Procurement Management Support?

External support may be particularly useful for:

  • complex tenders,
  • IT sourcing projects,
  • software and platform decisions,
  • cloud and managed-service procurements,
  • outsourcing projects,
  • complex evaluation models,
  • extensive stakeholder involvement,
  • limited internal resources.

The tasks and responsibilities of the contracting authority, external advisers and any required legal counsel should be clearly defined.

How Does EFS Consulting Support Procurement Procedures?

EFS Consulting supports procurement from needs assessment, procurement strategy and tender preparation through to supplier evaluation, negotiations and the award decision. In doing so, EFS Consulting combines procurement management with procurement, project management and IT sourcing expertise.

Digital solutions such as Tenderee® and Tendalyzer can complement methodological and technical project work.

Does EFS Consulting Also Support IT Tenders and System Selection?

Yes. EFS Consulting supports companies and public contracting authorities, particularly in tendering and selecting software solutions, platforms, cloud services, managed services, outsourcing and transformation partners, as well as other complex IT procurement projects.

How Are Tenders Evaluated Objectively?

Evaluation is based on the award criteria published in advance and the defined evaluation method.

Depending on the procurement project, the following may be considered, for example:

  • price,
  • costs or life-cycle costs/total cost of ownership,
  • functionality,
  • technical quality,
  • implementation approach,
  • quality of service,
  • sustainability characteristics,
  • qualifications of the personnel specifically assigned.

The criteria must be objective, transparent, verifiable and linked to the subject matter of the contract. General company characteristics may not simply be used as award criteria.

Note

This article provides a general overview of Austrian public procurement law. It does not replace legal advice or a review of a specific procurement procedure. The legal provisions and tender documents applicable at the relevant time are always decisive