Circular Economy Act (KrWG) and Waste Management Act (AWG): What Businesses Need to Know
The KrWG and AWG govern how businesses in Germany and Austria manage waste and take responsibility for resources. This insight explains the main obligations, the differences between the two acts, and the implications of extended producer responsibility (EPR) and the EU Packaging and Packaging Waste Regulation (PPWR). It also explores how environmental compliance can support an economically viable circular economy.
Table of contents
Key Takeaways
- Germany’s KrWG and Austria’s AWG 2002 prioritise waste prevention and high-quality recovery.
- Obligations depend on the activity, waste type, product group and target market; retailers, importers and service providers may also be affected.
- Extended producer responsibility (EPR) requires the businesses concerned to finance and, where applicable, organise waste management.
- The PPWR has generally applied since 12 August 2026; in Germany, it is complemented by the new Packaging Law Implementation Act (VerpackDG).
- Clear responsibilities, reliable material data and coordinated processes provide the basis for legally compliant and economically viable material loops.
What Is the Circular Economy Act (KrWG)?
The Circular Economy Act provides the central framework for German waste law. It aims to conserve natural resources and protect human health and the environment during waste generation and management. Among other matters, it regulates the obligations of waste producers and holders, product responsibility and the supervision of waste management.
Objectives of the Act
The starting point is the five-step waste hierarchy under section 6 of the KrWG. It sets out the following order of priority:
- Prevent waste
- Prepare waste for reuse
- Recycle waste
- Recover waste in other ways, for example through energy recovery
- Dispose of waste
This hierarchy directs attention to decisions made before waste treatment. Longer service lives, repairs and reusable packaging can prevent materials from becoming waste prematurely. Only then does the question of suitable recovery processes arise. The best overall environmental outcome remains the guiding criterion. Technical feasibility and economic reasonableness must also be taken into account.
The act therefore supports the transition from the linear use of raw materials to a circular economy in which products and materials remain usable for longer. For businesses, this creates opportunities to reduce material losses during development and production.
Relevance for Businesses
Businesses may hold several roles at the same time: (1) producers of production waste, (2) holders of equipment that has reached the end of its service life, or (3) parties responsible for products they place on the market. Section 23 of the KrWG embeds product responsibility in development, manufacturing and distribution. The specific requirements are set out in supplementary legislation. This does not create identical take-back or registration obligations for every product.
Manufacturers, importers, distributors and businesses responsible for packaging therefore need to assess how general waste obligations interact with product-specific requirements. For packaging, the EU Packaging and Packaging Waste Regulation (PPWR) and the VerpackDG are now particularly relevant. The latter replaced the previous Packaging Act on 12 August 2026.
What Is the Waste Management Act (AWG)?
Austria’s Waste Management Act 2002 regulates sustainable waste management at federal level. It sets requirements for waste prevention, collection, treatment, record-keeping and business organisation. It also contains provisions for specific products and collection and recovery schemes. Legislation at provincial level supplements this framework, for example in municipal waste collection.
Objectives and Core Principles
The AWG also follows the five-step waste hierarchy. Precaution and sustainability form its foundation: environmental impacts should be prevented, resources used efficiently and waste recovered to the highest possible quality. Separate collection supports this objective where it facilitates preparation for reuse or other recovery.
Producer responsibility connects waste management with decisions made earlier in the supply chain. For packaging, section 13g of the AWG specifies which businesses bear responsibility as primary obligated parties. Depending on the supply arrangements, this role may fall to manufacturers of service packaging, packers, importers or foreign distance sellers. The specific requirements are governed by the Packaging Ordinance and now also by the PPWR.
Relevance for Businesses
In day-to-day operations, the AWG covers matters such as the classification of waste generated, its storage, transfer to authorised waste management providers and the associated records. Businesses that also supply products or packaging must assess the relevant producer obligations separately. Effective waste management at a business site does not automatically fulfil these obligations.
Businesses in Austria also face organisational requirements. Facilities that generate waste and employ more than 20 employees generally require a waste management concept. Approval procedures may require such a concept regardless of employee numbers. Businesses with more than 100 employees must appoint a professionally qualified waste management officer. These thresholds relate to specific organisational obligations; they do not provide smaller businesses with a general exemption from waste law.
Which Businesses Are Subject to the KrWG and AWG?
The KrWG and AWG apply in particular to businesses whose activities generate waste or that hold, collect, transport or treat waste. These include industrial and commercial businesses, retailers, logistics companies and many service providers. Additional obligations arise when certain products and packaging are supplied. The decisive factors are the specific activity, location and target market. An Austrian business may therefore be subject to the AWG for its own operations while also having to meet German packaging obligations when supplying Germany. Business size and low sales volumes do not provide a general exemption.
Comparing the KrWG and AWG
Germany’s KrWG and Austria’s AWG pursue similar objectives but differ in how they are implemented. A comparison shows which underlying principles they share and what these mean for waste management in business operations.
Similarities Between the KrWG and AWG
Both acts reflect the core principles of European waste law. They prioritise waste prevention, promote preparation for reuse and recycling, and establish the basis for product responsibility. They therefore support European objectives for resource conservation and reduced environmental impacts.
This creates a shared task for businesses: material flows must be understood, responsibilities assigned and waste management routes traceable. The economic benefits arise when this information also improves procurement, product development and the return of products and materials. A documented material flow can show, for example, where unmixed production residues can be recovered and where mixing reduces their value.
Differences Between Germany and Austria
The overall objectives are similar, but administrative procedures differ. This is particularly evident in packaging. The following overview reflects the legal framework after the PPWR’s general application date.
| Area | Germany | Austria |
| General framework | Circular Economy Act (KrWG) | Waste Management Act 2002 (AWG) |
| Packaging law | PPWR and VerpackDG; the previous Packaging Act has been replaced | PPWR, AWG and Packaging Ordinance 2014, insofar as they are compatible with EU law |
| Registration and reporting | LUCID Packaging Register; additional quantity reports as required by the applicable obligations | Electronic Data Management (EDM) for roles subject to registration and reporting; packaging quantities covered by a compliance scheme continue to be reported through the schemes |
| Scheme participation | Mandatory participation for packaging subject to scheme participation obligations; other packaging is subject to separate requirements | Participation in approved collection and recovery schemes for household and commercial packaging subject to these obligations; assess exemptions separately |
| Authorised representatives | Required for covered foreign businesses supplying end users directly without an establishment in Germany | An existing requirement applies in particular to foreign distance sellers supplying private end consumers; also consider PPWR requirements |
Registration or participation in a scheme in one country does not automatically fulfil the obligations in the other. Terms such as ‘producer’ and ‘importer’ must also be interpreted within the relevant legal context.
Why Do the KrWG and AWG Matter to Businesses?
Waste law affects costs, the ability to supply customers and product design. Missing packaging data or an incorrectly identified responsible legal entity can lead to inaccurate quantity reports and registrations. Correcting these issues often involves several functions: procurement, sales, logistics and compliance need to bring together the same material and sales data.
Customers may also request reliable information on recyclability, material composition and take-back options. Businesses should include these requirements in supplier agreements and approval processes at an early stage. Otherwise, data may only be requested when a product launch or customer approval already depends on it.
Waste and material data provide an operational basis for an ESG strategy. They show whether resource use and material losses are actually declining. However, the KrWG or AWG alone does not impose a general ESG reporting obligation on every business. Their strategic value lies in using the same verified information for environmental compliance, internal management and applicable reporting requirements.
Packaging development should therefore consider several criteria together. Reducing packaging weight can save material while weakening product protection. Reuse can offer benefits where the number of rotations, return transport and cleaning arrangements suit the application. The economic assessment should cover procurement, use, return and treatment. This makes it possible to determine whether a change reduces the overall material input or merely shifts costs elsewhere.
What Obligations Do Businesses Have?
Prevent and Reduce Waste
Businesses should identify where rejects, surplus stock or unnecessary packaging arise. Procurement specifications, appropriately sized packaging and repairable equipment can reduce material use and waste management costs. Which measures are legally required depends on the applicable rules and the specific activity. The waste hierarchy provides the basic guidance.
Ensure Recycling and Recovery
Waste generated must be classified correctly, collected separately where required and sent for permitted treatment. When selecting waste management providers, relevant authorisations and demonstrable recovery routes matter. A large quantity of waste collected says little about how much material quality is actually retained.
Recycling targets also depend on whom they apply to. Targets for Member States or collection schemes do not automatically translate into identical individual targets for every business. Businesses must establish which requirements they must meet themselves and what performance their contracted schemes must demonstrate.
Meet Documentation and Evidence Requirements
In Germany, the requirements to provide evidence under section 50 of the KrWG apply to the proper management of hazardous waste. Separate obligations include maintaining registers under section 49 of the KrWG, while section 51 allows the authorities to issue case-specific orders. Statutory exemptions must be assessed separately. Austria generally requires continuous records of the type, quantity, origin and destination of waste. These must be retained for seven years in accordance with the applicable rules. Simplifications or exemptions apply in certain cases.
In practice, weighbridge tickets, transfer records and waste management documentation should be clearly assigned to a site, period and waste stream. Consistent master data makes verification easier and prevents conflicting information between procurement, environmental management and reporting.
Supply Packaging in Compliance with the Law
For each relevant type of packaging, businesses must establish which legal entity holds which role. This determines obligations such as registration, scheme participation, reporting and information provision. In Germany, LUCID registration and scheme participation are separate obligations. Austrian participation obligations generally remain in place during the current transitional period.
Businesses must also consider the PPWR requirements for packaging that already apply. Depending on their role, these include conformity assessment, technical documentation and an EU declaration of conformity, as well as applicable substance restrictions and the general recyclability requirement. Paying scheme fees alone therefore does not demonstrate full packaging compliance.
Fulfil Extended Producer Responsibility Obligations
EPR stands for extended producer responsibility. It assigns financial and, where applicable, organisational responsibility for the waste stage to the producers identified by law. Depending on the product group, obligations are fulfilled through collective schemes or permitted individual arrangements. The legal producer role may differ from the business that physically manufactures the product.
The EFS insight on product responsibility and EPR provides further context.
Consider International Supply Chains
For cross-border supplies, businesses should document the packaging type, supply route, recipient and responsible legal entity for each destination country. Appointing a service provider does not replace this assessment of roles. Since August 2026, businesses making covered direct supplies from abroad to end users in Germany have been required to appoint an authorised representative. The obligated business must still complete LUCID registration itself.
Consequences of Non-Compliance with the KrWG and AWG
The consequences depend on the specific offence. Section 69 of the KrWG provides for fines of up to EUR 100,000 for certain infringements and up to EUR 10,000 for others. Germany’s VerpackDG contains its own administrative offence provisions, with maximum fines of up to EUR 200,000. These amounts are not blanket penalties for every documentation error.
A transitional rule applies to the administrative offences under section 66(2) of the VerpackDG that directly concern PPWR infringements. Under section 68(17), these provisions apply only from 12 February 2027. Other administrative offence provisions, such as those concerning registration or scheme participation, already apply. This transitional rule does not postpone the underlying PPWR obligations.
In Austria, section 79 of the AWG is particularly relevant to administrative penalties. The authorities may also issue orders requiring compliance to be restored. Under packaging law, failure to meet the required conditions or non-compliant packaging can also lead to restrictions on sales.
For international businesses, the consequences may include supply disruptions, rework and disputes with trading partners. Reputational risks also arise when published sustainability claims do not match demonstrable material and waste management processes. A systematic review before market entry is therefore also economically relevant.
How Do the PPWR and EPR Affect the KrWG and AWG?
EPR is a regulatory principle, while the PPWR is a directly applicable EU regulation governing packaging and packaging waste. The KrWG and AWG remain the general national foundations of waste management law. The PPWR adds harmonised packaging requirements to this framework and also changes national implementing rules.
Regulation (EU) 2025/40 entered into force on 11 February 2025 and has generally applied since 12 August 2026. Individual requirements apply from different dates. Those already relevant include substance restrictions, obligations for economic operators and the general requirement under Article 6(1) that all packaging placed on the market must be recyclable. Reuse systems have also had to meet the applicable PPWR requirements since August 2026, although certain existing systems are partially exempt under grandfathering provisions.
The harmonised design-for-recycling criteria and associated performance grades, by contrast, apply from 1 January 2030 or 24 months after the relevant delegated acts enter into force, whichever is later. Further requirements on minimum recycled content and quantitative reuse targets follow mainly from 2030 or later dates. The respective exemptions and deadlines, some of which depend on supplementary legislation, must be taken into account.
A single ‘PPWR deadline’ is therefore not enough for businesses. Each packaging group requires an assessment of the relevant role, applicable requirement, evidence and implementation date. Technical conformity and EPR obligations should be reviewed together.
Transitional deadlines also require attention. In Germany, existing LUCID registrations remain valid; necessary changes under section 68(2) of the VerpackDG must be made by 12 November 2026. For producers becoming subject to registration for the first time, the corresponding transitional deadline was 12 September 2026. In Austria, existing rules on scheme participation and reporting largely remain in place for the time being.
How EFS Consulting Combines Circular Economy and Product Compliance Expertise
EFS Consulting helps businesses translate regulatory requirements into practical decisions about products, packaging and material flows. It combines expertise in product compliance and the circular economy.
In product compliance, EFS Consulting brings extensive experience in analysing regulations, implementing product-specific obligations and establishing compliance management systems. Its circular economy expertise adds the assessment of circular business models, resource-efficient product design and the use of data throughout the product lifecycle. Combining these perspectives makes it possible to address legal requirements and economically viable circular solutions together.
Clarify Legal Requirements and Identify Action Needed
EFS Consulting analyses which requirements apply to a business’s products, packaging and target markets. For packaging, these include the relevant economic operator roles, EPR obligations, evidence of conformity and implementation deadlines. Assessing existing processes and documentation identifies gaps, which are translated into a prioritised overview of the measures required and the responsibilities involved.
Assess Material Loops and Packaging Solutions
Its circular economy work examines where material use can be reduced and the value of products and materials retained for longer. Experts assess options such as reuse and take-back models, material choices that support recycling, and changes to product design. Business cases make the costs and benefits of these options comparable. Businesses can therefore base packaging decisions on both regulatory requirements and economic criteria.
Embed Implementation and Documentation in Business Processes
EFS Consulting supports implementation across procurement, development, logistics and compliance. This includes assigning responsibilities, designing approval processes and organising the required product, packaging and supplier data. Technical documentation and declarations of conformity are integrated into existing workflows. Regulatory monitoring helps identify new requirements early and adapt measures accordingly.
For an Austrian supplier delivering packaged goods to Germany, this might mean, for example, that EFS Consulting helps clarify roles and obligations in the German market while assessing whether switching to reusable packaging makes economic sense. The required documentation, packaging changes and adjustments to return logistics can then be planned together.
The EFS content on Resource Recovery and data-driven measurement of circular economy performance offers further perspectives. These resources explore how material recovery and measurable progress can be brought together in business management.
Conclusion
The KrWG and AWG provide the framework for responsible waste and resource management. A business’s actual obligations depend on its activities, products and target markets. Under the PPWR, consistent packaging data, clearly defined producer roles and traceable evidence become central to implementation. EFS Consulting helps you assess these requirements and translate them into an actionable compliance and circular economy strategy.
FAQs
What is the KrWG?
The Circular Economy Act is Germany’s central law on resource conservation and environmentally sound waste management. It regulates matters including the waste hierarchy, waste management obligations and product responsibility.
What is the AWG?
The Waste Management Act 2002 provides the federal legal framework for sustainable waste management in Austria. It covers waste prevention, treatment, record-keeping and organisational obligations for businesses.
Who is subject to the KrWG?
In particular, waste producers and holders, as well as businesses that collect, transport, trade in or treat waste. Product-specific rules also apply to certain manufacturers and distributors.
Who is subject to the AWG?
These include Austrian waste producers and holders, collectors and treatment operators, as well as businesses with product-related obligations. Foreign businesses may also fall within its scope, depending on their activities.
What is the difference between the KrWG and AWG?
The KrWG applies in Germany and the AWG in Austria. Both follow similar European principles but differ in organisation, procedures and detailed national obligations.
Which businesses do the KrWG and AWG apply to?
The acts apply across sectors to businesses with relevant waste streams or product-related obligations. The specific obligations depend on the activity, waste type, product group and market.
Do international businesses need to consider both the KrWG and AWG?
Yes, where activities or supplies trigger obligations in both countries. Directly applicable EU law and product-specific national rules must also be considered.
How does EFS Consulting help businesses comply with the KrWG and AWG?
EFS Consulting helps businesses analyse regulatory requirements, assign responsibilities, organise data and evidence, and develop and implement measures for the circular economy and packaging compliance.